Member
Need advice doing front brakes, rotors are layered in the hub for 4 wheel drive , I have schematic of how it all goes together, but no torque specs or information putting it all back together, don't want to screw it up ,plus the. Philips head screws are a pain trying to get them out without damaging them . Any help Will be appreciated, the rear brakes were a breeze. I'm installing drilled and slotted rotors with ceramic pads . Should help performance & looks.
Super VXer
Check out this thread:
http://www.vehicross.info/forums/sho...wheel+bearings
Kenny did a great write up on how to replace your front rotors and wheel bearings. I have used this write up three times now. Initially to replace my rotors and repack the front bearings and then twice just to repack the bearings.
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
-Douglas Adams, Mostly Harmless
Posting Permissions
Reply With Quote