Quote Originally Posted by Leon R View Post
I have just applied SN on my Proton, which had terrible fading. I used just the black dye, applying with an old sock. First coat was VERY streaky! Second coat was darker and less streaky, but still streaky! For the third coat, I diluted the dye 2:1 with thinner and it has delivered even better results, but... I still can see the streaks!

Perhaps I should just let it try a bit more. I might just put on a forth coat (after thinning it a bit more). This product seems to be easier to apply when it is thinner.

BTW, I am still on my first 4oz bottle! It is almost gone, but still the same bottle! I am not sure how you guys can use up 2-3 bottles!

How long are you letting it dry? We found that it stayed streaky for even 12 hrs…I was panicked when I did mine with that first coat.
But after it dries for 12 hrs +, it gets LESS streaky. Did you read about the people that used the Preval sprayer to apply it? They had virtually no streaks. ANd yes, you dilute it to use the sprayer, and a few others commented that diluting it helped with streaking when hand applied. I didn't dilute mine, didn't know to do it.
BIGGEST TIP! DO NOT try to keep wiping it on when there's very little product on your rag….don't try to stretch it, keep rag pretty wet.
I did that and my front driver side bumper got all messed up (I described it all in my earlier posts).

I also applied 4 coats, and would not recommend that…at least stop at 3 coats.

Post some pics