Originally posted by valenki
Do I understand this correctly ? Are the amps actually inside the rear seats or screwed behind the rear seats?
The tubs that hold the amps are inset into the seatbacks for a flush mount. They have a small lip around them that is about 1/2" tall and 3/4" wide that covers the cutout in the seat and is covered in the red vinyl.

This was not a real easy prosess due to the construction of the seats. There is a 1" round tube across the the seat back that had to be cut and the support foam is formed/poured around a 1/4" wire mesh grid that also had to be cut out to fit. The tubs use the cut ends of the round tube and a dowell to fasten the bottom into the back and make it a little easier to remove if needed.

I'll take some pics tonite so you have a better idea.


Jay