Klearz silver side marker housing question

[Riff Raff]

I bought the ones with the black housing and have to say I was not happy with the quality of any part of them. The clear lens just shows how poor the connection is between the housing and the lens. I spent a few hours sanding and polishing mine after they arrived. I then painted a black stripe along the edge to cover the inconsistent connection between the lens and housing. It is not my preference but it looks better than it did!

x2. I don't have them, but I have heard about their very poor quality echoed by many other VX'ers here on this forum over the years. The consensus is that they are very cheaply made and their quality of workmanship along with their "fit-n-finish" is substandard. Not worth the money.

[VX KAT]

x2. I don't have them, but I have heard about their very poor quality echoed by many other VX'ers here on this forum over the years. The consensus is that they are very cheaply made and their quality of workmanship along with their "fit-n-finish" is substandard. Not worth the money.

Reading over the many threads about the Klearz brand ....most said the front turn signal lenses were higher quality, and had better fit/finish than "Ron's".
But, several said the front side marker lenses weren't so good....had some excess glue that caused them to not fit flush on the fender.

http://www.vehicross.info/forums/sho...ghlight=klearz

http://www.vehicross.info/forums/sho...ghlight=klearz


cyronman has many close up pics in his gallery of the various lenses from Klearz:
http://www.vehicross.info/gallery/sh...r/2573/cat/500

[WormGod]

Right. I am happy with the signals, but the fender markers are a bit undercrafted. Edges were rough and the glue seem was kind of an eye sore. A bit of elbow work on your part is needed to make them more "presentable". Mine have held up quite well though.