Installing SBC Brackets

[yellowgizmo99]

I just used high temp black RTV and holding good.

[tom4bren]

I liked the black RTV route too. Plenty strong enough but easier to work with than the hard cure stuff & can be re-worked if need be.

[JAMAS]

I used marine grade epoxy....dont remember which.

[tom4bren]

I used marine grade epoxy....dont remember which.

Read instructions carefully though. Many marine grade adhesives are UV cured. If you put some of that on yer winder brackets, it may never cure. I learnt that the hard way on another project.

If it was PC-11 that you used, it is NOT UV cured.