What's the most backspacing you've seen?

[vt_maverick]

Thanks guys.

One thing that confuses me is the stock wheel is listed with 38mm offset. Since it's a 7" wheel, the center point would be 3.5". 38mm is right at 1.5".

1.5" + 3.5" = 5" backspacking for the OEM wheel. (According to my calculations).

But this chart shows it should be 5.5" backspacing. The chart looks wrong.

Or I don't understand something.



(I also did a search on backspacing. I looked thru most of the threads with that term. Not a single post mentioned OEM backspacing. Since my new VX no longer has stock wheels, I cannot verify what it SHOULD be.)

JUST DO IT! Patience and thoughtfulness != timely mods.

***WINNER: Least helpful post in a mod thread Category***

[89Vette]

JUST DO IT! Patience and thoughtfulness != timely mods.

***WINNER: Least helpful post in a mod thread Category***

Ughhh....what's this forum category for? Since it included a GIANT wheel thread, I thought it was the correct location. Is it not?

[crotchrocket]

***WINNER: Least helpful post in a thread Category***

2829th post in a row.......

[89Vette]

2829th post in a row.......

Wanna let me in on the joke?

[vt_maverick]

2829th post in a row.......

Well let me add another then...

[89Vette]

OK., thanks.

Without a specific reply, let me try the question this way....

Is anyone running wheels that have 3/4" more backspacing than stock? Basically, I'm trying to figure out if up to 1" more backspacing (than stock) will fit in the wheels w/o rubbing. For sake of argument, lets say it's with 30" diameter tires.