Tone hitch install

[vt_maverick]

The holes on the hitch did not line up with the holes in the frame so I had to drill all of the holes. In additon, the holes in the backplate were too high for the holes that I drilled in the front so I had to redrill those as well. I mounted the hitch as high up as it would go and still the backplate just didn't.

Unfortunately I didn't install my Tone hitch as I am not so good with the mechanical arts. But the shop I used told me the measurements that came from Tone were not correct when they went to install it. I know Tone made a bunch of these things, so maybe you chalk it up to variations in production quality (since VX's were hand assembled)?

[Mile High VX]

Thanks for all of the help...







Still needs a good wash and clean up...but it's been a bit brisk here...

Here's a tip: Make sure you have your cladding on something soft when you lay it down and when you are cutting the notch for the hitch so the edges dont get all scraped up. Do not ask how I know this...