Results 1 to 15 of 24

Thread: Wind noise

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Oct 2006
    Location
    01 Green Dragon 00291
    Posts
    255
    Thanked: 0
    Quote Originally Posted by RickOKC View Post
    Hey, thanks back to ya, tjh - if you hadn't asked this, I never would have noticed I was missing a bolt!

    Wow, that's hard squeeze a camera into! Here's a shot of the top driver's side hinge with the door open, looking from the outside through the opening between the front fender (left side of photo) and the door (right side of photo). I think I see the same thing you are describing:

    * The bolts are offset
    ** The top bolt is closer to the rear bumper
    ** The bottom bolt is closer to the front bumper

    (Don't hesitate to describe how you need another photo from a different angle.)

    Awesome ! that's exactly how mine are . How did you get that shot ? I just tried to snap a photo of mine and failed miserably . Thank you very much !

    SOooo this must be false :"Catalog Note: LH or Left = Driver Side; RH or Right = Passenger Side "


    Huh ! the washer hasn't fallen off , where your missing the bolt. Nothing but paint holding it there. I'm impressed.




  2. #2
    Member Since
    Mar 2010
    Location
    2001 Ironman 0588
    Posts
    1,176
    Thanked: 0
    Quote Originally Posted by tjh View Post
    Awesome ! that's exactly how mine are . How did you get that shot ? I just tried to snap a photo of mine and failed miserably .
    That photo was taken with the base of the camera resting against the door about 2 feet away from the hinge. It was still on the macro (close-up) setting so I'm surprised it stayed in focus. But, I had the camera set on the highest resolution so I still had to crop and reduce the size to keep the final image from being obnoxiously huge.

    SOooo this must be false :"Catalog Note: LH or Left = Driver Side; RH or Right = Passenger Side "
    I don't know what to say about that. 100% of the time, without fail, set in stone, it is "THE LAW" - left hand vs. right hand is ALWAYS determined as if you were sitting in the driver's seat. According to the part number you received - you got the wrong part. Both sides CAN'T be the same because, if rotated, the bolt holes would have been wrong. I'm stumped. But hey, it worked and you reduced your wind noise so.... WIN!

    Huh ! the washer hasn't fallen off , where your missing the bolt. Nothing but paint holding it there. I'm impressed.
    I'm impressed, too! I think it's funny that it will always be a mystery to me about how and why that bolt disappeared. Another point for the VX - even the paint is awesome! LOL


Similar Threads

  1. Wind deflectors
    By bssage in forum VX Talk...
    Replies: 11
    Last Post: 04/04/2016, 01:53 PM
  2. Window Wind Shield to reduce noise
    By nemo in forum VX Talk...
    Replies: 6
    Last Post: 10/16/2009, 05:03 PM
  3. Wind Noise
    By kobie in forum VX Troubleshooting...
    Replies: 5
    Last Post: 05/12/2004, 08:10 PM
  4. wind deflector
    By technocoy in forum VX Modifications...
    Replies: 8
    Last Post: 05/06/2004, 01:50 PM
  5. Wind noise at window
    By PBR in forum VX Troubleshooting...
    Replies: 4
    Last Post: 04/05/2003, 12:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails