Cladding- There's MANY threads on this, and one of my main areas of interests! The most current thread/s are testing some semi/permanent products.
Armordillo TS-1 (re-apply every 90 days)
GatorBack- A permanent application of a nice matte finish. Comes in 3 colors. Spray on. Forum member mike nomy applied it last month and is reporting on it's status and how it's holding up. So far so good.
Hood insert can be treated with same as cladding. I applied Restore/Refinish to my cladding and hood insert. My cladding has NOT worked out as it started to chip off, but it still looks great on my hood insert. I've got 1/2 can at least in case you might want to buy it for cheap.
Headlights cloudy- Don't worry about this condition, it's fixable in less than an hr or two.
Can easily be fixed (even I was capable of doing it)
You can buy a Kit that has a couple of the pieces & products, or you can buy the stuff separately. One of the best kits is the 3M Headlight restoration kit, around $10-$13 or so.
I lightly wet sanded them with 2000 grit sand paper.
Then used either Maguiers Scratch-X and/or PlastiX.
There's numerous threads covering it you can get specifics.
Engine Bay dirty- Know there's some threads on this too. I recall many use something with the word Purple in it (Magic purple or something like that), spray it down.
Reply With Quote