Tow bar

[tom4bren]

OK, I noticed on my install that it was very close to the gas tank shroud too but mine didn't hit. Rekin there's enough variations in VX's that I need to provide more clearance.

I couldn't get 1 of my cladding bolts in either. Keep meaning to go back & 'lean' on it a little to see if I can get it to fit.

If I ever quit procrastinating and get busy with the re-design to provide more tongue weight capacity, that problem will go away. The tube bumper that has the mounts for those bolts will go away & I'll have to replicate them into the hitch.

Thanks for the info.

It looks like he also bored out the hole for the locking pin. True?

[VX KAT]

It looks like he also bored out the hole for the locking pin. True?

No, the hole was there as is. I used a locking pin I already had.

And yes, LUNA, this was all about aesthetics for me. Don't care for the Curt style...and I might add it looks like the diaper was full too!

[tom4bren]

No, the hole was there as is. I used a locking pin I already had.

HMMM. In the pic it looked like the powder coating was gone from the inside of the hole.