Usually that happens from a sagging and/or misaligned door. Even just a couple mm can start causing that. Re-align your door if necessary and use a heat gun on the weatherstrip. Since it's a foam rubber, it won't be perfect, but should mold some.
If the adhesive doesn't work, I'll check the alignment. If it's that critical tho, I'll prolly make it worse trying to make it better.
Avoid taping it.... it will most likely tear the stripping when you remove it.
I taped it but I used 'lectrical tape so it came off easy without damage.
FWIW, the weather stripping in our VXs is VERY cheap and of poor quality. It gets brittle pretty quick and is malleable in a BAD way.
It's no worse than what's in other cars I've dealt with.
Originally Posted by WormGod
Super VXer
Posting Permissions
Reply With Quote