Quote Originally Posted by BigMeatVX View Post
Billy, You do not need to dissasemble the diff to get out the stub axles...It is a real pain in the ***** though...you need a tiny pair of snap ring pliers to get the two snap rings and they slide right out after removing the 4 bolts holding the bracket to the axle housing.
.................................................. ...............................................
I think that is what Billy was refering to. You need to basically drop your diff to slid shafts out, you do have to remove the diff brackets, which includes the 4 bolts you are referencing and the 2 bolts that hold the diff bracket to the frame per side. Then they slide out, but not before your diff is sitting on the floor This is the part that most people do not want to do, so by "dissassemble the diff" I think he meant drop it out of the VX, which yes you have to do.