33" or 34" tires; any effective differences?

[VX KAT]

My VX is 100% Stock "non-lifted" (no TB cranks, with OEM-RS) and I'm running the famous General - Grabber AT2 in P275/65R18 (32" O.D./44 lbs) mounted on the OEM 18x7 Stock Rims. They are absolutely bolt-on perfect due to the OEM rims without any further modifications; although the fitting is extremely tight, and just had to trim a little tiny triangle corner of front inner cladding (very common).

Just to be clear for dbp, that's the front outer corner of the cladding that you trimmed (and is a triangle shape), correct? Or if not, what part of the "inner cladding" are you referring to? I just pressure washed my wheel wells today so I was just looking quite closely at the cladding, liner etc, and am not sure which part you are referring to. Is it this piece?

[Riff Raff]

Yup, that's the exact piece and location of the cladding trimmed triangle. I used the term "inner" (aka inner-side) as in the "interior" of the forward portion of the front fenderwells. Basically, where the front portion of the front tires swing "inward" towards the engine. BTW, nice picture and thanx for sharing!!!