Maybe everyone is pooped out on poppers?

I started mine this weekend. Put in the spring, works nice.

Still trying to figure out the best attachment point for the solenoid. I drilled out the threads on the bracket to use nuts behind instead of tring to get a screw driver in that space. I also switched the screws holding the solenoid in the bracket to hex head so to make it easier to finger tighten or use an allen wrench. All 6mm hardware. Also picked up some rubber washers to go behind the attaching hardware to take the space created by annoying reenforcement ridge in the bracket.

Seems the green wire from the solenoid will only make it to about the kick panel, so it will have to be spliced.

I don't have a switch yet, so I have not figured that out yet.

Jonathan