Front bumper where the Refinish/Restorer is chipping & peeling off. It's only on the front (and where my front fender "may" have kissed a bush or branch in Moab). I'm convinced it's from a combination of high speed debris from highway driving and constant dirt/debris on my dirt road. It just chips /peels off like ladies clear nail polish.

I'm pretty sure if I reapply it, the areas will blend pretty good, but if you're going to do ANY wheeling where your cladding will come in contact with anything or much highway driving....I can NOT recommend R/R.

I SOOOOO wish I'd known about 303 before I did the R/R. Based on everything I've soaked in that stuff, I think it will be fantastic on the cladding.
Especially because it doesn't leave any type of film or sticky residue so doesn't attract dirt. I've used it on my tires then almost immediately driven the dirt road, they get a faint amount of orange dirt on them, but no more than w/o R/R.

If anybody has a good suggestion for how to remove the R/R without melting or destroying the cladding....I'm all ears!

I'd prefer to reapply 303 every month or so, than deal with the R/R.