you have to start with the very back of the console (the piece with the armrest).

there are two screws at the base of the back of the console, about even with the hinge for the armrest

the next two are gold and are located towards the front of the "cupholder" but along the sides of the console

once those are removed, pull the e-brake and lift the back of the console, reach under and disconnect the wiring harness that powers the mirror switches

you should be able to pull the armrest portion of the center console off, there are two "hooks" that attach it to the front peice around the shifters, jus be careful not to break them.

after thats removed there will be two exposed screws at the rear of the shifter console and two on the side towards the dashboard.

from there i dunno whats under there anymore, i removed the shifter plate and all that stuff under there.. which leaves a whole ton of room for switches on my vx!