Purolator pcv valve

[yellowgizmo99]

I had to put grommet on pcv then put in hole to get to fit with the oil also.

[mhill]

So Sue whats the verdict? I will be changing my pcv soon, which brand has the groups approval?

[WILLY]

I'm not sure where the pcv is,if i'm right i think i have the metal scew in on,cause that thing is the only thing i see that could be the pcv?

[VX KAT]

I'm not sure where the pcv is,if i'm right i think i have the metal scew in on,cause that thing is the only thing i see that could be the pcv?

The PCV valve is located right above the front, driver's side cylinder (I can't recall which cyl # that is). In this picture, on my plastic engine cover, right side, front, see the square thing projecting to the right (about 1" below the silver stripes)? The PCV is directly under that.

Just SLOWLY wiggle your engine cover up.
There's 4 pegs holding it on.
MAKE SURE YOU DON'T lose the 4 rubber inserts that go over the pegs.
They tend to fall off as you are lifting the cover.

As far as brand...many use the Purolator, but I know many use other brands too, but can't recall the brands right now, been too long ago. Do a search and I think many posts should come up.