Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 31

Thread: WINDOWS : Friendly service reminder!

  1. #1
    Member Since
    Jun 2004
    Location
    VX Adopted Out. 2005 BMW 325CI & 2006 4Runner.
    Posts
    1,330
    Thanked: 0

    Arrow WINDOWS : Friendly service reminder!

    Just a friendly reminder to lube up your window tracks with silicone spray to prevent binding. I just did mine, and thought I'd remind you all also...

    -biju.
    *

    He lingers -- happily -- in a new hybrid state of semi-hormonal adolescence and responsible self-reliance.


    *

  2. #2
    Member Since
    Jul 2003
    Location
    '01 Ebony #0939
    Posts
    2,142
    Thanked: 5
    Is there any particular manufacturer, brand, etc, of silicone spray that you've tried and would recommend?

  3. #3
    Member Since
    Aug 2006
    Location
    99, Silver, 1773
    Posts
    278
    Thanked: 0
    I've read some things before, but to be clear... (this might seem like I wasn't paying attention) You guys are talking about spraying a lubricant where the glass travels up and down in the rear part of the window frame? Not a sliding track that is down inside the door. Did I get it correct?
    If you don't first THINK THINK, you could end up in deep DO DO!

  4. #4
    Member Since
    Apr 2006
    Location
    2000 dragon green 0496
    Posts
    440
    Thanked: 0
    I have the silicone spray.
    Can someone tell me the best way to lube the tracks

  5. #5
    Member Since
    Dec 2002
    Location
    2001 Ebony 0177
    Posts
    2,120
    Thanked: 0
    With the windows up, jam the little red straw toward what you invision to be the lower corner of the glass. When you bump into the metal track (an inch or so) spray away... don't spray like you're paying for it. Soak it good. Repeat for the rear track. Put the window down and do the slots the glass rides in. Soak it good. Run the window up and down a few times. Smile at improved operation. Have a beer to celebrate just how skilled and clever you are. Have a beer to celebrate the first beer. Repeat the two final steps as many times as necessary, and as often as possible.

  6. #6
    Member Since
    Sep 2002
    Location
    '99 Ebony VX #0038
    Posts
    1,256
    Thanked: 0
    Hey Chopper, are those steps supposed to be executed in order? I keep celebrating, but my darn windows still ain't working!
    Calmini Cone Air Filter, PowerVault PV2 Muffler, OME Trooper Springs, Rancho RS9000X Shocks, 285/75R16 Nitto Grappler AT's, Pioneer DEH P8000R In-Dash CD, Amps and Drivers Built by Orion, Wires and Fuse Blocks by KnuKonceptz, Vibration Damping by BQuiet, Alarm System featuring Auto Start and Remote Windows, Yakima LoadWarrior w/Full Size Spare, Debadged/Custom Titanium Grill Logo, Tint (5% Rear / 20% Front), Steel Braided Brake Lines, G2 Painted Calipers

  7. #7
    Member Since
    May 2006
    Location
    SOLD!
    Posts
    7,257
    Thanked: 2
    CRC Heavy Duty Silicone Lube



    3 or 4 bucks at Wal*mart. I use it everytime I wash my baby.

    Bart

    Quote Originally Posted by Y33TREKker
    Is there any particular manufacturer, brand, etc, of silicone spray that you've tried and would recommend?

  8. #8
    Member Since
    Jun 2004
    Location
    VX Adopted Out. 2005 BMW 325CI & 2006 4Runner.
    Posts
    1,330
    Thanked: 0
    Any quality silicone spray will do. I personally use Valvoline

    I do it monthly as not to gum up the bottom of the inside of my door (it will leak out onto your cladding if you use too much). I do it with the windows down, using the red straw to shoot the spray up and down the tracks (rubber insert/track). Immediately rolling the windows up and down a few times to make sure it smears all over...

    -biju.

  9. #9
    Member Since
    Aug 2006
    Location
    1999, Astral, Vehicross, 1619
    Posts
    1,822
    Thanked: 1
    Unfortunately, the previous owner was not aware of this and the guides on the back part of my doors is cracked and will fold when I roll up the window, so I have to press it out and help it up. Do they make Viagra for window guides?

  10. #10
    Member Since
    Mar 2005
    Location
    01 Ebony - #0379
    Posts
    793
    Thanked: 0
    Quote Originally Posted by CrnCnn
    Unfortunately, the previous owner was not aware of this and the guides on the back part of my doors is cracked and will fold when I roll up the window, so I have to press it out and help it up. Do they make Viagra for window guides?
    Do a search. I think I saw some one with a similar problem if I understand it right, and they CAREFULLY bent the metal track rail a tad (re-aimed the upward direction of the window a bit outward - I think), so when the window went up it stopped sliding out of the track. Good Luck.




    RE: Silicone spray, man does it ever work. I've tried various goop and greases and they just make it worse after a day or so, dust starts to gum it up... The product needs to be liquid and safe on rubber like silicone spray...

    But there's gotta be a better way... We should be able to pull out the rubber slide and line it with something permanent, something solid like wax paper, but durable... It's the rubber-window edge contact that needs a "friction-reduction". hmmm......

  11. #11
    Member Since
    Mar 2006
    Location
    2001 FOXFIRE 0579
    Posts
    887
    Thanked: 0

    buy some washers

    crn,
    hey, you probably need to do the washer trick also with your windows. that trick alone sped up my windows, and stopped the window from popping out.
    use the search on window fixes, and you will find it.

    david


    so I have to press it out and help it up.

  12. #12
    Member Since
    Aug 2006
    Location
    1999, Astral, Vehicross, 1619
    Posts
    1,822
    Thanked: 1
    Quote Originally Posted by IndianaVX
    crn,
    hey, you probably need to do the washer trick also with your windows. that trick alone sped up my windows, and stopped the window from popping out.
    use the search on window fixes, and you will find it.

    david


    so I have to press it out and help it up.
    Thank you, I will check it out.

    Mucho apreciato...

  13. #13
    Member Since
    Jun 2004
    Location
    VX Adopted Out. 2005 BMW 325CI & 2006 4Runner.
    Posts
    1,330
    Thanked: 0
    It's soooo nice outside in Denver today (63 degrees!). Lubed up my windows today... they thanked me for it.

    -biju.

  14. #14
    Member Since
    Dec 2002
    Location
    2001 Ebony 0177
    Posts
    2,120
    Thanked: 0
    washed and waxed the VX today...read this thread, and went out and juiced the trax; thanx for the reminder. Now if we can put this on a timed loop, so it pops up every three weeks or so.

  15. #15
    Member Since
    Jun 2004
    Location
    VX Adopted Out. 2005 BMW 325CI & 2006 4Runner.
    Posts
    1,330
    Thanked: 0
    (bump)

    LUBE!

    -biju.

Similar Threads

  1. Tech Reminder
    By Chopper in forum VX Talk...
    Replies: 7
    Last Post: 05/16/2007, 12:26 PM
  2. A/C question reminder.....
    By IndianaVX in forum VX Talk...
    Replies: 19
    Last Post: 01/11/2007, 03:31 PM
  3. MD/VA/DC Meet reminder
    By WormGod in forum Meets...
    Replies: 36
    Last Post: 05/14/2004, 08:10 AM
  4. Dakar Rally Reminder
    By deermagnet in forum VX Talk...
    Replies: 6
    Last Post: 01/06/2004, 09:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails