Isuzu OEM 5.12:1 Ring & Pinioin Gears....

[BigMeatVX]

Received my REAR 5.12 gears the other day...for the isuzu 12 bolt ...

However, These gears are 244mm and are made to fit the Trooper 12bolt.
To use them in a VX you will need the axle shafts and 3rd member out of a 98+ Trooper...
It seems isuzu discontinued the smaller 12 bolt (VX style) and all the later ones are the bigger stronger "modified" 12 bolt....the axle shafts are Dana 60 sized and the ring gear is larger also....ARB is availble with these.

I will be installing them very soon...

[RamAirZ]

Are you positive the shafts just swap over? I would think at LEAST you would need the new bearings for the axle too since the axle shafts are larger. I think it might be easiest to just swap the whole axle. I've debated doing this with the VX because of the Dana 60 similarities. Any word on the front ring and pinion?

[Ldub]

Not yet, but very soon......

OK, as we all know, things change...
What with uncooperative weather, heat/humidity induced laziness, & moving, I'll consider myself lucky to get the geerz/locker in before Moab in May...

Any word on the front ring and pinion?

http://www.vehicross.info/forums/sho...24&postcount=5

[RamAirZ]

OK, as we all know, things change...
What with uncooperative weather, heat/humidity induced laziness, & moving, I'll consider myself lucky to get the geerz/locker in before Moab in May...



http://www.vehicross.info/forums/sho...24&postcount=5

He said something in a PM to me before about getting the wrong ones when they sent them so that's why I was asking

[LittleBeast]

Are you positive the shafts just swap over? I would think at LEAST you would need the new bearings for the axle too since the axle shafts are larger. I think it might be easiest to just swap the whole axle. I've debated doing this with the VX because of the Dana 60 similarities. Any word on the front ring and pinion?

My thoughts exactly.....

[RamAirZ]

Got this from Jerry over on Planet:

AXLE BEARIGNS ARE THE SAME , AXLES ARE LARGER SLIGHTLY FROM THE RETAINER AREA ALL THE WAY TO THE SPLINE END , BUT THE OUT BOARD SEALS AND THE AXLE BEARINGS A RE ALL THE SAME FOR THE 12 BOLT AXLE

Very interesting.

[VX1032]

BTW, if I rememeber correctly, ARB discontinued the locker for 98+ all that is left is the stock on the shelves.

[BigMeatVX]

Hmmm...then Id better hurry up and get one...LOL