My bad, it's in the how2 section:
http://www.vehicross.info/modules.ph...c&daysprune=-1
You'll probably need these 3: bearing repack, diff drop, CV boot install
You need to decide before you start: are you replacing the entire half shaft including the CV outer races (green cups)?
If you answered yes, then you'll be breaking down the bearings & you'll prolly want Kenny's write-up on that. You'll also need the diff drop instructions to pull the axles from the differential.
If you can re-use the outer races, then your job will be much easier & you can just use the CV boot replacement instructions.
When my CVs went Tango Uniform, the axle shop was able to machine the races whilst mounted so they didn't have to go through removing the differential brackets.
BTW, thanx Ldub for making sure that the whole WORLD knows that I suffer from brain farts on occasion!!! (actually, I was just having a Handee moment).
Reply With Quote