Results 1 to 15 of 31

Thread: Replacing Both CV Joints ?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Dec 2002
    Location
    '01 Ironman
    Posts
    1,286
    Thanked: 0
    Only special tool I can think of is snap ring pliers to take the ring off inside the axle "tube". After you get everything off and have a little slack to work with you will need to remove the snap ring before you can slide the axle out.

    As far as I know there is one CV that is made aftermarket and is a descent price, but the other side is only from Isuzu or a junkyard VX. Please someone clarify if I am right about that. If both CV's are made aftermarket please let me know where I can find them. I think I am running out of junkyard CV's and the Isuzu charges WAY too much for the new one.
    2001 Ironman Daily Driver... 3.5" suspension lift (OME912 springs and 1" spring spacer), ball joint flip, 1.5" front diff. drop, 33"x12.5 TrXus MT, 16x10 Eagle Alloy rims, Interceptor, PV muffler, K&N air filter, Alpine Supercharger, Bilstein shocks, and some trimming.

    2000 Ironman Project LS-1 VX... very slow progress but someday....... ohhhhh someday......

  2. #2
    Member Since
    Jan 2009
    Location
    97 Jap Import, Black BEAST
    Posts
    1,515
    Thanked: 0
    Quote Originally Posted by AlaskaVX View Post
    Only special tool I can think of is snap ring pliers to take the ring off inside the axle "tube". .
    Cool man, thanks! I got one of those to change to manual hubs
    Speed Thrills, Boredom Kills!!

  3. #3
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    I just swapped mine over the weekend while installing the locker. I got the ones off of ebay. Another item you might need will be a steel bar and a large random sized socket. The CV will come with a bolt. It is designed to be threaded into the CV so you can pull the CV out far enough to get the c clip back in. Thread the bolt through a hole in the large steel bar, use the socket as a space to pry against as you tighten the bolt. It is a TIGHT fit. I thought I was going to break something. I got the two CVs for 120 USD shipped. They were brand new. Seem decent enough.

    I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
    Thomas Jefferson

  4. #4
    Member Since
    Dec 2008
    Location
    98. Blazed Peacock Mica, 1504 SOLD VxLess Now :O
    Posts
    423
    Thanked: 0
    iirc dont the 97 trooper cvs fit?

    i heard something like stock are much stronger than aftermarket ( well from some isuzu guys over here changing there ones on there mu's)

  5. #5
    Member Since
    Jun 2004
    Location
    99 Astral Silver VX #1872 + 99 Ironman WIP
    Posts
    10,613
    Thanked: 1

  6. #6
    Member Since
    Feb 2007
    Location
    2000 Proton VX - 0776
    Posts
    9,258
    Thanked: 0
    CR,

    Go to the download section & look at the instructions for the diff drop installation. That should contain all you need to know for the CV swap.

    Tom

    BTW, BritVX picked up his diff drops last week so if y'all live near each other, work together since the extra hands can be VERY helpful.
    [SIGPIC][/SIGPIC]

    Put a smiley after you say that Bub.

Similar Threads

  1. Ball Joints ?????
    By Triathlete in forum VX Talk...
    Replies: 9
    Last Post: 01/15/2011, 05:44 PM
  2. U Joints
    By VX crazy in forum VX Talk...
    Replies: 21
    Last Post: 07/16/2010, 02:03 AM
  3. My U Joints are shot!!!
    By VXIRONwoMAN in forum VX Talk...
    Replies: 31
    Last Post: 06/04/2008, 11:41 PM
  4. CV Joints
    By tom4bren in forum VX Troubleshooting...
    Replies: 16
    Last Post: 07/02/2007, 02:07 PM
  5. U-Joints
    By VR4-Quest in forum VX Talk...
    Replies: 1
    Last Post: 04/28/2006, 09:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails