Recovery /snatch straps 101...to use Billy's words....

[VX KAT]

Another mystery today...recall I couldn't get the 3/4" Crosby shackles on front tie down hole. Got the next size down 5/8" (3.25 t) and just barely got the driver's side on, but couldn't get the pass side on...pretty close but still struck out.

YAH!!!! Got the pass side 5/8" shackle on finally.....well, OK,maybe "I" didn't actually get it on .....I took it to my mechanic

[don moore]

If your looking for VX parts and that .....Then look no further and ask VX KAT..

[VX KAT]

If your looking for VX parts and that .....Then look no further and ask VX KAT..

How 'bout "Kat's Parts R US"?

[BigSwede]

I kinda skimmed this thread, but I'll just say that the front tow hook is fine for recovery...in the rear if you have a hitch installed it works well to stick the tow strap loop into the receiver and put the hitch pin through the loop. If you don't have a hitch a frame-mounted tow hook is a much better option than the tie-down point.

Is the VX frame tapped for a rear tow hook like the Troopers are? It would be on the passenger side frame rail.