Quote Originally Posted by FuddyMucker View Post
Hi Guys, I am also needing to know how to remove the half moon cover from my newly purchased VX, I have removed all 6 nuts and taken off the to clips but nothing is shifting. I even tried tapping on the center of the plastic lugs with a punch and I can now recommend the no one else does as the plastic is very thin and with 2 taps it has made a bluge visible from the outside. I can only guess that as well as the clips it must be also stuck on!

The old display head unit was broken when I got it and after following some sound advise from Alterastro I replaced it with a fantastic new headunit that suports the rear camera, Unfortunatly the Camera also seems at fault, because when in reverse it changes to the camera automatically but after 2 seconds shows "NO SIGNAL".
The camera unit has power going to it so guess its the camera itself?? either way I need the back cover off and the camera out, firstly to test it and secondly (if it is broken) to find out what replacement will fit in the space.
Hi FM,

that's exactly my experience with the half moon cover and also my concerns with the plastic lugs.

It's interesting that after a couple of seconds you get 'no signal' as I just get the normal 'Camera' message suggesting that it's just the cover that not moving out of the way which is a fault.

The half moon insert is the same on the US VX so hopefully the guys can give advice. It might be that this issue is raised on another thread (ie not this JDM thread)

Kirk