I received the nuts and bolts that I ordered from Merlin. I went to install them last night and quickly realized that I need to drop the cross member in order to even screw that bolt into the transfer case. I also couldn't tell if the mount was bad (like in Ldub's case HERE). So I think I am going to have to bite the bullet and have my local isuzu shop do it for me ($127.50 plus parts). Since they are dropping the cross member, I am going to purchase a new mount (from Merlin) and have them install that too. Is there anything else I should have them do since they are already going to have the cross member unbolted. I can't think of anything, but figured I would ask. I will most likely have them replace the crossmember bolts (crossmember to frame) for good measure.