Yup, $50 per set is a steal.

"Welder Guy" is just starting a business on the side. He does quality work tho. LittleBeast or Tomdietrying can attest to that (they have seen the modified differential brackets that he did).

He may even be able to come in cheaper than $50 but I like round numbers & since it's already such a good deal, I'll leave it alone. Besides, I wanna keep him happy ... have some more Diff Drops to do. I also want to get him to try a panhard rod drop bracket for those that lifted & experience bump steer (mine has one from Calmini & I don't get any bump steer).

I'm not going to mess with picking up the mounting hardware for you tho since that'll just jack up shipping cost. You can pick up what's needed at any Lowes, Home Depot, Auto Zone, Fastenall, ...

You'll need 4 each of the following (actually 8 of the flat washers):

3/4" long 3/8x16 (grade 8 would be best but not absolutely necessary)
3/8x16 nut (Nylock would be good but not necessary)
flat washer
lock washer

Installation instructions are simple:

1. Remove 4 bolts holding seat to floor of VX
2. Take seat out of VX
3. Remove 10+ years of accumulated cheerios, popcorn, etc from floor of VX
4. Use above listed hardware to bolt brackets to bottom of seat. It's important to leave bolts wobbly loose at this point
5. Put seat back in place
6. Use original bolts to bolt brackets to floor of VX (only put in a few turns at this point
7. Tighten bracket to seat bolts
8. Tighten bracket to floor bolts
9. Enjoy

I think these move the seat 3.5" forward. I'll try to measure on mine tonight.

Yes, there are two more threads on this topic but I wanted a survey so that I could guage interest. Actually one of the other threads was about moving the Drivers seat back for the 'bean pole' VX owners. We haven't tackled that issue yet.

Tom

BTW: if you answered yes to the survey, PM me your mailing address & I'll try to get a shipping cost for each.