Quote Originally Posted by nfpgasmask View Post
IIRC, Its very simple, there is a cap that you pop off and then a nut you unscrew and they lift right off.

Bart
Yes, Bart is exactly right. There is a protective cap at the base that "pivots up" exposing the retainer nut to remove the entire arm assembly.

The key thing to do beforehand is to take a felt-tip Magic Marker Pen and make a mark on the head of the mounting pin (male end) and edge of hole on wiper arm (female end) so that it's easy re-mount the wiper arms perfectly back in the original position(s).

In addition, you can also take a piece of masking tape and tape along the edge of the rubber blade wear it touches the glass windshield before removal. In this way, when the arms are re-attached then you'll know that they are re-installed in perfect original alignment.