Tackling the hood insert. Color sanding question...

[rowhard]

Thanks for the info. Just sanded it with 400 before its looking good.

I plan to prime it then paint it with Bumper Bar Black. Have used on stuff on before and normaly turns out good, if it doesnt sand it off and try another way

need to lightly sand the primer coat too, again giving the paint a tooth to grab onto.

[WormGod]

Wanna be really simple about it? Just use a Scotch-Brite pad and you will be fine.

http://www.shop3m.com/61500123239.html

These are great for prepping wheels for paint too. Just make sure you clean the surface well afterward to remove impurities. I recommend Prep-Sol and some tack cloth.

http://solutions.3m.com/wps/portal/3...gl6LR3C821Z4bl

http://www.createforless.com/3M+Fini...utm_medium=cse

[Sprey]

Thanks for all the Info.

I sanded it down with 400 Wet the otherday. After i stripped all the colored paint off with 120. Will be buying some plastic primer this week then sanding it like Rowhard said then painting it with the Bumper Black stuff.

Then time to put my Vx backtogether