Off-Road Ventvisor Mod..

[crotchrocket]

they look good!!! as i mensioned before i broke mine gonna try and glue it together this weekend but if not i will cut it down to make it look as normal as possible. What did you use to trim yours with??

[tom4bren]

Fan,

Great job in making those fit. On a personal note, I don't like wind deflectors in general. Always in my periferal vision & quite irritating (like bifocals). Rekin it's an aquired taste???

The other down side is that when I spat Copenhagen juice out da winder - wind deflectors make it go all over the side ob da VX - not good.

[Riff Raff]

TOM4BREN & LDUB--- Sounds like you two(2) guys need to seek anti-tobacco use counseling. Baaaaaaaaaad habit.

[tom4bren]

We know but ....

What will Dub do without a paka smokes rolled up in his t-shirt sleeve & me without my Copenhagen ring on the pocket o my jeans. Dat's just plain SEXY.

OK - back on topic now.

After what I said about not wanting wind deflectors on the VX - I'd LOVE a set on the RV. Rainwater from the roof drips in the winders sumpin awful.

[Ldub]

Soooooo...Tom...a friendly side wager to as to wether this topic becomes another regular rant?...

I'll get witcha on the pm side, to see which side you want...

Threadjack off...peace out...

TOM4BREN & LDUB--- Sounds like you two(2) guys need to seek anti-tobacco use counseling. Baaaaaaaaaad habit.

We know but ....

What will Dub do without a paka smokes rolled up in his t-shirt sleeve & me without my Copenhagen ring on the pocket o my jeans. Dat's just plain SEXY.

OK - back on topic now.

After what I said about not wanting wind deflectors on the VX - I'd LOVE a set on the RV. Rainwater from the roof drips in the winders sumpin awful.

[tom4bren]

Naw, let's do this right. Look for the new poll.

[VCrossfan]

I can't speak for the larger version that VXfan is working with, but I find that the "mere mortal" size that I've got (weathertec), work best for keeping rain out when I've got the window cracked a couple inches to vent out smoke...yeah, I know...

(mr mackey voice on) smokin' is bayud m-kay?...

VCrossfan, I lke the looks of where you're going with these...

Just a thought, maybe experiment with a heat gun, to get the radius of the bend closer to the same...

I know, they're kind of expensive to be experimenting with like that, just my two cenz...

Yes Mr.Dub they do move a slightly away from the door line but I went ahead and installed them to see the "Wind effect" inside ( it's not bad). Next was the heat gun or Bernz-O-Matic flame to get a good contoured bend. The flame worked very well to Cauterize the end I cut (made it factory smooth) and the front I trimmed slightly around the mirror I used and Air Sander with fine grit then I Cauterized it slightly. Once I get them to the bend I want I'll re-mount and post pic's

they look good!!! as i mensioned before i broke mine gonna try and glue it together this weekend but if not i will cut it down to make it look as normal as possible. What did you use to trim yours with??

I taped the rear to get a my straight line then used a box cutter with a fresh blade and cut over and over with control not to get out of the groove and scratch out into the good part of the visor. It took awhile but was worth it then I Cauterized it to get it smooth. the front by the mirror I lightly ground then Cauterized it also. be careful and use fast swipes with the flame, don't stay on it long and I went with the direction of the cut, not back and forth side to side

[CrnCnn]

Any updates? I know its only been a couple months but I like the larger style as well.

[VCrossfan]

Any updates? I know its only been a couple months but I like the larger style as well.

There still on and looking good, Maybe in the spring I'll remove and apply some heat to get the exact curve, but they do ride the line of the door pretty darn close, but I'm a stickler on fit-n-finish. I'll post any changes...