At your own risk!

There are 2 torx screws at approximately 8:30 and 3:30 clock positions on the backside of the wheel, maybe t-15 torx. The downloadable or hard VX manual has specific electrical information on removing the SRS module (pretty interesting read) . Some have suggested disconnecting the battery and waiting 30 minutes,

I recommend you follow the instructions in the manual exactly.

After you disconnect the SRS module and horn wires the module will come out easily. You will then see the steering wheel mounting bolts clearly. You'll have to devise your own filler/ adapter for the gaping area behind the wheel.

A final caution from the backside of the module.......

"To help avoid personal injury due to unwanted inflation:

1. Do not take apart, crush or puncture.
2. Do not check a circuit by electrical tester.
3. Do not service, dispose or apply electric power to this unit.
4.Do not heat in excess of 200 degrees F.
5. Follow all instructions in the service manual."