Yes, I know how.........

For maximum front articulation you will need the following:

Sway bar disconects
Calminis upper A-arms
remove upper bumpstop completly
"trim" lower bumpstop 1/2"
Upper ball joint mount flip with spacers (3/4")
Add lower ball joint mount spacers (1/2")
Replace outer front cross-member bolts (2) with lower profile Hex head units (to clear lower A-arm)


These will allow your front wheel travel to increase to a whopping 10" !!!!!!!!! ....... set your ride height correctly and you will have 5" up-travel and 5" down travel.....NICE!!!!!....

Also helpfull, is to add another rubber bushing UNDER the top shock mount (1/2")....... yes the threads ARE long enough

And of course, drop the front axle 2", and save your CVs

(2+inches is the amount of downtravel you will gain from these)
(More if you took the measurments with the sway bar still on)


And there is a gain in upward travel as well.......


Allan