Well, that is the next project, Swordy......

The steering dosn't bind yet, but the tie rods are at an EXTREEM angle at full droop.
I hope to relocate the outer tie rod end to the top side of the steering knuckle....but haven't had the time yet....

I had 3/4 spacers on the front axle, at first, but had problems with the new longer bolts bending due to "axle wrap" or the twisting force on the axle-housing from tourque...and also the axle housing seemed to shift around a bit more than stock....At one point a yr or so ago, the bolts came loose on one side and then all the "twist" was on the other side....so the housing broke (rotated the long side of the axle housing in the punpkin) I had to rotate it back and weld it up.;eekr; .....What a **@#!