Quote Originally Posted by LittleBeast View Post
Yeah EGRmaybe, but I would replace these 2 and then see what you have going on. I would do the EGR next after these 2 were replaced:

Idle Control Valve ($49):
STANDARD MOTOR PRODUCTS Part # AC75

or

AIRTEX Part # 2H1018
http://www.amazon.com/Airtex-2H1018-...4742127&sr=8-7

Fuel Pressure Regulator ($30):
STANDARD MOTOR PRODUCTS Part # PR223
http://www.amazon.com/Standard-Motor...4742157&sr=1-3

or

ACDELCO Part # 2142159 {#19187373}

HI mate, thanks for the info. a ICV (idle control valve) will cost me 200$ AUS dollars, the egr valve is even more expensive here. I think when the beast goes in for her's next service i will replace the ICV and EGR and i might as well do the intake mainifold gasket as well.

Blacksambo wrote
Did you check the OBD2 code reader read out? If not do so, first. Your problem sounds a lot like a code 171. If so, carefully replace the common chamber gaskets. I reco the OEM top, and Fel-Pro brand bottom, about 60 bucks total.

Thanks blacksambo i will check out what we can get over here in Oz that is the eqivalent.