Daylight running lights

[etlsport]

the diagram i posted would be for a light that functions only as a daytime running light, such as the small lights below the headlights, if you wanted to use the headlights for that you would have to identify which wire going to the headlight bulbs powers the low beam, and run from the output post of the relay to that wire... could be done fairly easily

[mikemol]

I passed both the Federal and Provincial inspections today having that pin from the relay connected to a fuze for AC. Once I passed both inspection I removed the wire from the fuze and no more DRL. So as the easiest temp DRL to pass inpections it will work. I don't think it's any good for a long term DRL and if anyone plans on having it long term, it should be done properly as one of those proposed diagrams.