Results 1 to 12 of 12

Thread: TOD Check Light On JDV VX

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #9
    Member Since
    Jan 2009
    Location
    97 Jap Import, Black BEAST
    Posts
    1,515
    Thanked: 0
    Quote Originally Posted by Hetzer View Post
    hi mate, i can only suggest that you get under your front end and have a look at your front diff. you want to check that your sensor plugs have a good connection. you have been in mudd and krudd latly so you may given this a bit of a knock.

    All i got sorry

    (on a side note, i did loose my 4wd to my front diff a little while ago, turned out to be a crushed vucumm hose. though it did not affect my tod display)


    I am confused by the mension of vacume hoses?? i saw someone else mension it too. I thought the system was fully electronic?? The electromagnetic clutch simply engages the front wheels to a degree depending on road conditions which are fed to it from front and rear prop speed sensors, TPS sensor and brake sensor?

    When in Low range the clutch is bypassed by a drive chain.
    Last edited by crotchrocket : 06/04/2009 at 04:02 AM

Similar Threads

  1. tod check light
    By zadam123 in forum VX Troubleshooting...
    Replies: 9
    Last Post: 11/10/2016, 03:16 PM
  2. check TOD light
    By fred78 in forum VX Troubleshooting...
    Replies: 4
    Last Post: 10/20/2014, 12:45 PM
  3. check light and abs
    By FlyingV77 in forum VX Troubleshooting...
    Replies: 2
    Last Post: 05/28/2013, 04:23 AM
  4. TOD Check Light
    By saberwolf in forum VX Troubleshooting...
    Replies: 10
    Last Post: 12/28/2008, 09:48 PM
  5. Tod Check Light Help!!!
    By ron in forum VX Troubleshooting...
    Replies: 12
    Last Post: 07/02/2007, 10:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails