Scott,
I tried to give the seat switch a shot before Moab, but I could NOT figure out how to get the access mechanism off of the passenger seat. It looks like the cable that connects to the back of the passenger seat is attached to a little tab that is welded onto the seat and that tab is absent on the driver seat. It's easy enough to just unbolt the seats and swap them but then the slide adjuster is near the transmission hump instead of on the door side, and then the driver side seat would be the access to the rear and not the passenger.
Maybe someone else has had more success.
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
-Douglas Adams, Mostly Harmless
Reply With Quote
Originally Posted by MSHardeman
