J, so you replaced the inner seal and it STILL leaks? I have seals for both sides and I am planning on doing them this summer. Did you use a seal driver? Did you use OEM seals?
Bart
Super VXer
J, so you replaced the inner seal and it STILL leaks? I have seals for both sides and I am planning on doing them this summer. Did you use a seal driver? Did you use OEM seals?
Bart
Super VXer
I actually have small leak in my drivers side axle seal. It happened after I had my CV issues on that side and the shop that did all of the work said that it was a little difficult to get the seal seated correctly so that may be the issue that you're having.
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
-Douglas Adams, Mostly Harmless
Super VXer
Bart,Originally Posted by nfpgasmask
If you're talking about the seals on the axles, then no seal driver is needed. The diff drop installation instructions available cover it pretty good. I think I needed to use a piece of PVC pipe as a slide hammer for the bearings but they went on pretty easy too.
Tom
[SIGPIC][/SIGPIC]
Put a smiley after you say that Bub.
Posting Permissions
Reply With Quote