Quote Originally Posted by LittleBeast View Post
Mark and I both had them on stock rims, so i think stock offset is +38 on those 18" Isuzu rims so you will be further out slightly. You might be a tad bit outside the wheel arcs with the included wider 285's, and by tad bit I mean a few mm. Like maybe 5mm outside cladding at the most, no biggie hardly dedtectable by the naked eye. You WILL have to shave a small triangle out of the front of the front wheel well cladding, you may or may not have to shave a little bit off the rear of the front wheel well, this is NO BIG deal really. If you do have to shape the metal slightly just make sure to use some touch up paint to eliminate any future rusting and don't worry about how pretty it looks it is all covered by plastic anyways. You will not have to do anything at all to the rear wheel wells ever unless you want to run some 36" tires or something Go with the 285 60 18 and you will be so happy you did, you might not ever change it again.
Very convincing LittleBeast! I'm fine with cutting cladding. I can swing a hammer too. Thanks!