Concealed Hitch Receiver Available Again!

[CrnCnn]

I dont know, I am just not convinced. Not doubting any quality, or "supply n demand issues." It just seems too much to me.

[TheGanzman]

I'm reminded of the saying: "No good deed goes unpunished..."

1. Pricing - IDENTICAL to what Tone was charging, only this has the extra step (and expense!) of powder-coating.

2. Design -Virtually IDENTICAL to Tone's - same thickness materials - only better, stronger welds; did I mention - SAME price?

3. Installation - IDENTICAL to Tone's installation procedure; go to his website, see the photos, read the narrative...

4. If you take the time to READ my post(s), you'll see that I left the safety chain loops OFF of MY receiver assembly which is PICTURED above. You can request safety chain loops or a 1/4" steel plate with holes at the time of YOUR order.

Any questions?

[CrnCnn]

1. Dont take it the wrong way.

2. I never understood Tones pricing either.

3. I appreciate the effort made and am not saying its bad or that it is better or worse than the original.

4. Maybe I am naive about metal work but it just seems high.

5. Enough said, I am taking my ball and going home.

:gring:

[ScottinMA]

And I negated to view the bottom of his post where he mentions that he opted not to purchase the model with safety chain provisions. My mistake. I own Tone's (RIP) hitch and love the fabrication. It's subtle and quite a nice design IMHO. Besides the bolts I had it welded to the frame since I'm pulling some significant weight and just wanted to make sure. So, if the price is the same as TONE's then some might want to pitch the extra $ for the concealed style of the hitch...I did.

[IndianaVX]

[quote=ScottinMA; since I'm pulling some significant weight

Scott,
are you pulling 2000lbs with that hitch? i know tounge weight wont be that much, but im just afraid of pulling my bumper out from under the vx......

i did get confused on the two hitches, im sorry about above post, and the mounting to the frame. and again, i dont question the quality, or any other aspect of the hitch that was made. im just concerned about the amount of pull that the hitch will withstand.

thanks

[tom4bren]

I pull my SeaDoo with Tone's hitch (pix in gallery). It's about 2000 lbs. No problems to date.

Tom

[TheGanzman]

Looks like this Friday is the day that my buddy and I will do this. For those of you who have installed this receiver assembly "out of the box", how long can I figure two retards to install, with no beers in the mix?

[ScottinMA]

[QUOTE=IndianaVX;157257][quote=ScottinMA; since I'm pulling some significant weight

Scott,
are you pulling 2000lbs with that hitch? i know tounge weight wont be that much, but im just afraid of pulling my bumper out from under the vx......

i did get confused on the two hitches, im sorry about above post, and the mounting to the frame. and again, i dont question the quality, or any other aspect of the hitch that was made. im just concerned about the amount of pull that the hitch will withstand.

thanks[/QUOTE]

Indiana,

I believe the hitch is rated for 5000 lbs. I pull 2 to 3 thousand without problems.

[4X4 UFO]

if you're also installing a trailer light harness. It took me longer than that, but I only had access to one retard! Don't forget the 2 "hidden" screws behind each side cladding panel, and take your time cutting the notch in the rear cladding.

Randy

[VCrossfan]

I fab'd mine about 4 years ago, going off Tone's great design with my own Tweaks. $50 total and $20 of it was the powder-coating. Go to any farm and home supply and buy a blank 2" receiver about 10" long, a 3/8" thick angle iron ( I think mine is 6" x 12" ) and using my home 110v mig I pulled the bumper cover off/on several times and cutting the receiver each time until I was happy with the location/angle then tacked with the 110 mig, took it to my buddies race shop and hit it with the 220 mig, powder-coated and installed. Saving a ton and having a warm fuzzy feeling inside. The price Ganzman had really isn't that bad considering the huge use you'll get from it, I just had equipment, time and experience in fabbing..

Sorry,, Kinda dirty...

[tom4bren]

Any questions?

I gots a question.

I contacted Fat Man Fabricators & they didn't know WTF I was talking about. I was told that the only hitch they make is for the LR Discovery.

I can get 'Welder Guy' to make them but I need one for him to take measurements from. Have you installed yours yet? If not, can I borrow it to have drawings made or can you get drawings made?

Tom

[JAMAS]

Please do....

I wants one for my b-day.

[tom4bren]

Dang it. Yer not making this easy on me are you? That only gives me about 2 weeks to get'r done & I need my hitch this weekend.

I s'pose you want the ORIGINAL Tone version again?

[VX KAT]

Dang it. Yer not making this easy on me are you? That only gives me about 2 weeks to get'r done & I need my hitch this weekend.

I s'pose you want the ORIGINAL Tone version again?

I can't believe I'm saying this....but.....I was just sayin' to hubby, boy I sure wish I could find one of the Tone hitches to buy, it's the ONLY type I'd put on, (No Curt, etc..)....hmmm, I'm pretty sure I'm in if this can be made again.

Tom, ya gotta come thru for us now! No pressure or anything!

[JAMAS]

Dang it. Yer not making this easy on me are you? That only gives me about 2 weeks to get'r done & I need my hitch this weekend.

I s'pose you want the ORIGINAL Tone version again?

yes. Please kindly dismantle your VX yet again for me.

if you get it done by my b-day, I would be impressed. But I will most likely have a delayed b-day present, unless I go with a curt hitch.