Results 1 to 15 of 44

Thread: CB Install for Moab

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Apr 2004
    Location
    2000, Ebony, VX, 0370
    Posts
    2,503
    Thanked: 12
    Bart,

    Looks like you found one, but I was going to say that I know there are DIN sized CB's out there, and some that are even smaller than that. Jack (pbkid) has his mounted IN the cubby under his arm rest (pics Jack?) so you don't see it at all.

    I have a handheld CB also, and that's why I switched to the more permanent install. For the past few years in Moab I've had to hold the thing up inside the car as we're wheelin' to get good reception. I think what the other guys are talking about, though, is a handheld mic that has all of the controls on it for volume, gain, etc., but there is a remote mounted "black box" that contains the real guts of the system. I think Billy (Moncha too?) has one so maybe he can chime in on how it works.

    The handheld (http://www.midwayusa.com/viewproduct...campaign=10611) I have can be hooked up to an external antenna by removing the battery case and slipping on a cigarette lighter/antenna adapter. That would have been the easiest install of all, but I just like the look of that thing sitting there, and it makes me feel like a big trucker. Now all I need is a catchy handle and I'll be good to go.
    "The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
    -Douglas Adams, Mostly Harmless

  2. #2
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    I will probably do the hand held with the controls all in one, tuck the black box under the driver's seat. For my antenna, I am getitng a marine antenna mount, had one on my boat, has a quick realase so you can lay the antenna down flat, and its plastic and stainless, so no rusting. If it can withstand off shore fishing/bouncin/trailering, it can handle the Vx. They cost a bit more than a whip setup, but I don't need 6 feet of antenna "whippin" around up there. As far as the mount on the passenger side, be careful, if you slide the seat up, it may hit it. That is where I put my drink holders, mounted them right the center console portion. I don't mind drilling holes in the Vx though...

    I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.
    Thomas Jefferson

  3. #3
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    ya the girlfriend has had my camera for a few days now...

    ill get pics asap..
    "Do Not Seek Praise. Seek Criticism."

    "If You Can't Solve A Problem, It's Because You're Playing By The Rules."

    "The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."

    -Paul Arden

  4. #4
    Member Since
    Dec 2008
    Location
    01, LineX tan/black, 1055
    Posts
    3,380
    Thanked: 0
    Quote Originally Posted by pbkid View Post
    ya the girlfriend has had my camera for a few days now...

    ill get pics asap..
    So the girlfriend is interfering with the VX........hhhhmmmmmmmmm.




    J/K

  5. #5
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    hmmm...i cant upload photo's. sorry guys. ill try tomorrow, maybe the server is having issues.

    i go into the form and 'browse' the photos into the slots, then when i hit upload/submit it takes a while and just resets the page.

    ^^^Marlin- well, she isnt interfering with the VX, just the camera. so she is ok for now.

    actually, she's a pretty good one, and i trust her a lot... some here have actually seen pictures or seen her LIVE wheeling my vx!!!

  6. #6
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    there we go! got em loaded!

    ok, here is how i did mine..

    please forgive the dirty interior first off, my VX is long since needing a good detail!

    secondly, the initial mounting i did was not the best job. i need to re-finish the look of it so that it looks more stock...anyhow, here we go-


    looking straight in


    from the passenger side


    and the front


    it sits fairly flush


    and there is my antenna mount

    enjoy

  7. #7
    Member Since
    May 2003
    Location
    2000, white, IronMan, SUPERCHARGED, 0069
    Posts
    1,220
    Thanked: 0

    Wink




    [SIGPIC][/SIGPIC]"If its fast and reliable, its not cheap;
    if its fast and cheap, its not reliable;
    if its cheap and reliable, its not fast."


    If love is blind, why is lingerie so popular?

  8. #8
    Member Since
    Jun 2005
    Location
    01 Dragon Green VX 1286
    Posts
    423
    Thanked: 0
    Quote Originally Posted by pbkid View Post
    and there is my antenna mount

    enjoy
    Dude.. is that rust?

    I know the weather sucks at the moment but...????

Similar Threads

  1. My CB install
    By RamAirZ in forum VX Modifications...
    Replies: 25
    Last Post: 09/30/2010, 07:35 PM
  2. amp install
    By MZ-N10 in forum VX Modifications...
    Replies: 3
    Last Post: 05/26/2006, 05:22 AM
  3. SC install not going to well....
    By jayfotos in forum VX Talk...
    Replies: 25
    Last Post: 06/23/2004, 06:10 PM
  4. ps2 install
    By Amack76 in forum VX Modifications...
    Replies: 10
    Last Post: 09/27/2003, 07:36 AM
  5. Amp install help
    By DeafVX in forum VX Talk...
    Replies: 1
    Last Post: 08/26/2003, 05:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails