Is a -19 Offset going to look crap??? help with options!

[nfpgasmask]

Well, with -19 you are going to get a pretty beefy look. It's hard to say without seeing some meat on those wheels.

My wheels have a 0 offset, so just for reference, here is how far they stick out:



Bart

[crotchrocket]

Thanks Bart,

Im coming to the conclusion that i will sell these wheels!!

I am also thinking of going for a 265 75 16 tyre instead of a 285 to reduce the width and any adverse effect the extra rolling radius is going to have on the gearbox, diff etc

[LittleBeast]

If I were you I would get the 285/75-16 MASTERCRAFT COURSER MTs. The rims you have already will look pretty sweet with some 285 wide tires, and surprisingly the 285 tires are really not going to stick out much further than the 9" rim (around 1" more). With a 9" rim and -19 offset you are looking at 4.25" backspacing, and my 8.5" rims with a +15 offset have a little over a 5.25" backspacing. So yes your RIMS stick out over 1" more than mine, but since you are looking at 285 tires (11" wide roughly) and I have 12.5" wide tires you tires will probably only stick out about 3/4" more than mine. I think you will be close to in the ballpark with the 285s on the current rims you have. It would not be my 1st choice, but considering you already have the rims I would at least try to 285s out for a while, I think it will grow on you and you will like it. If you were however throwing some 12.5" tires on there I would say no way. I gave you all the comparisons so you could compare and visualize using some of my photos if you want, here is one thread that might help in the visualization area:

http://www.vehicross.info/forums/sho...ht=rims&page=3

[rowhard]

Oi Mate, will the bobbies be a bother or am I just remembering what it was like around the air bases with us rich yanks?
Here is mine with a 285 and +18 offset

[don moore]

have the wheels (the stock ones) painted black or dark gray..some look good like that.

[crotchrocket]

Oi Mate, will the bobbies be a bother or am I just remembering what it was like around the air bases with us rich yanks?
Here is mine with a 285 and +18 offset

lol, yes me old mucca, the pigs wil be a right old Frasier Crane and probably nick me for them!!!

I'll end up with 3 points on my licence and a 60 quid fine

[rowhard]

lol, yes me old mucca, the pigs wil be a right old Frasier Crane and probably nick me for them!!!

I'll end up with 3 points on my licence and a 60 quid fine

Cockney rhyme, something you don't hear in these parts.

Well, must go, here comes Trouble and Strife and that can certainly be a Frasier Crane, Taa Taa

it's called English for those of you that are wondering

[Sprey]

Well done on the lift.
Ive thought about lots of wheels as well.

Im doing basicaly the same as you crotch, the lift and a different set of wheels.

have my eyes on some 16x8 0 offsets wheels at the moment.

When you get the chance could you upload a pic of your latest setup. Would be great.

Also had a look at your pics of the 4x4 trail you went out on the other day looks like you had a great time

[crotchrocket]

If I were you I would get the 285/75-16 MASTERCRAFT COURSER MTs. The rims you have already will look pretty sweet with some 285 wide tires, and surprisingly the 285 tires are really not going to stick out much further than the 9" rim (around 1" more). With a 9" rim and -19 offset you are looking at 4.25" backspacing, and my 8.5" rims with a +15 offset have a little over a 5.25" backspacing. So yes your RIMS stick out over 1" more than mine, but since you are looking at 285 tires (11" wide roughly) and I have 12.5" wide tires you tires will probably only stick out about 3/4" more than mine. I think you will be close to in the ballpark with the 285s on the current rims you have. It would not be my 1st choice, but considering you already have the rims I would at least try to 285s out for a while, I think it will grow on you and you will like it. If you were however throwing some 12.5" tires on there I would say no way. I gave you all the comparisons so you could compare and visualize using some of my photos if you want, here is one thread that might help in the visualization area:

http://www.vehicross.info/forums/sho...ht=rims&page=3

Thanks bud, thats a great help. I HAVE to cover the wheels with an arch extension and was hoping i could fit the wheels with a minimal 45mm extension (same as Ldub's) as i really don't want the 4.5" ones, they will look bad imho !

[crotchrocket]

UPDATE ****


Ok so, i'm going to sell these and have bought 16 x 8 black steel rims with a 0 offset and a set of Insa Dakar Turbo tyres (BFG M/T COPY) in 265 75 16.

Thanks for the help guys, i'll post some pics. I liked the idea of the aggressive offset but can't get away with it without the arch (fender) extensions in this country!!

[kodiak]

I have a set with a 0 offsets I use from time to time.

[nfpgasmask]

Yeah, 265 75/R16s are what I am running now, and imo, it looks perfect and balanced.

Bart