CarSystem Refinish Restorer

[Riff Raff]

What about using Windex to prep it? I recall somebody has been using Windex on the cladding to make it look good. So it apparently doesn't dry it out too bad...maybe it would be a pretty good prep solution to get off most of the "oily" type products we've put on it (Back to Black, etc...)

ROWHARD--- I would try the WINDEX idea first on a sample cladding location, as it is an extremely "mild" cleaner and won't harm anything. If that doesn't work well; then upgrade to 409 Cleaner, as 409 is a bit more powerful than WINDEX. It is always wiser to begin with a mild type cleaner, and then gradually upgrade to a stronger cleaner as required to accomplish the mission. SIMPLE GREEN; might be an option, too. AIM HIGH!!!

[rowhard]

Now, I do hope this stuff last as long as some of you have said cause it don't look half bad.:gring:

[VXNIT]

Seems like application is swirly and uneven, does it come off? Definately looks better than grey washed out side but looks like you have put nothing on bad cladding for long time. I use Back to Black and it does collect dust somewhat but nothing seems to be perfect for the cladding IMO. Definaely looks better than nothing on the cladding.

[rowhard]

Seems like application is swirly and uneven, does it come off? Definately looks better than grey washed out side but looks like you have put nothing on bad cladding for long time. I use Back to Black and it does collect dust somewhat but nothing seems to be perfect for the cladding IMO. Definaely looks better than nothing on the cladding.

no, actually I did it everytime I washed it. with different products. the undone cladding looks that way caused I used a strong chemical cleaned to get all the old product off of it.

[Phantom]

The first coat just goes on that way. a second (or third) coat will coat over any swirls or streaks. You want a lint free cloth to put this on, and thin multiple coats is the way to go. Try to put it on with as uniform a wipe as you can, dont change direction or do swirls. I went a section of cladding at a time and waited the 10 mins and wiped off then put on additional coats until it looked "right" then moved on to the next section. A little goes a loong way. I have had it on mine for almost seven months and it still shines up nicely. Invest in a few hours putting this on and do it right, and you'll just need to treat your cladding once or twice a year (depending on weather conditions/how hard you ride her) instead of every other month like most of the other stuff (back to black, tire shine, clear coat wax, ICE)

[rowhard]

Phantom, did you wax once you got it right to get a high sheen look? Step seven says you can

[Riff Raff]

ROWHARD--- Nice pic's. I like the "half-n-half" look to show us "before-n-after".

Incidentally, did the Body Shop do a good job on your VX from the Winter incident??? Did you ever get your antenna "buzzing" sound corrected??? AIM HIGH!!!