Super VXer
Well, I just got my supply of this stuff today, we'll see if its all that is cracked up to be.
Well, I just unpacked it. It tells me in 6 languages what it does. It tells me in 7 languages about safety, but I don't have a bloody clue on how to use it. Where are the instructions??
Last edited by rowhard : 03/02/2009 at 04:55 PM
Greetings, Earthling. We come in peace... Never mind "Paris to Dakar", the VehiCROSS looks ready for the Martian desert.
Super VXer
ROWHARD--- For the official manufacturer's instructions, do a "search" for: ALTERNATIVE GATORBACK ,then specifically look at thread posting #30.
I don't know how to add a direct link to that specific thread, but the above "search" route will immediately get you there. Aim High!!!
Super VXer
Here's the link to the .pdf file.
http://www.carsystem.ca/shared_files...estorer_gb.pdf
VX KAT
....the adventure BEGINS ANEW! ...2015......
Remember that life is not measured in the breaths you take, but rather in the moments that take your breath away.
Super VXer
Think a foam type paint brush would work OK for application?
Super VXer
Um, I don't think so from my experience, but I can't say for sure. I used a terrycloth rag which worked pretty well. I bristle-type paint brush would probably work well.Originally Posted by VX KAT
Super VXer
Thanks, I saw that, but the prep seemed vague. Do I need to try and get all of the other crap off that I have tried.
Super VXer
I would try to get any other products off if they are freshly applied.
Super VXer
I'm gonna buy some of this stuff too, even though my cladding still looks like new. My advice for "prepping" is BrakeKleen (in the red can) - it will remove EVERYTHING that is on there, and leave ZERO residual - you'll have a perfect palette for this product, IMHO...
Super VXer
Wouldn't BrakeKleen be a little too harsh for the cladding? If that is the stuff that is made to clean gunk off of engine blocks it may melt the cladding. I would try it on a hidden area first to make sure it doesn't do any damage.
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
-Douglas Adams, Mostly Harmless
Super VXer
when you are on the page that you want to move....copy the URL at the top of your browser...then paste into the thread
"Do Not Seek Praise. Seek Criticism."
"If You Can't Solve A Problem, It's Because You're Playing By The Rules."
"The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."
-Paul Arden
Posting Permissions
Reply With Quote