Quote Originally Posted by Ldub View Post
Nice...that's how I did mine. (almost EXACTLY, that scares me a little...)

The only difference being, I fabbed up a diverter plate on the bottom side of the hood to channel any incoming water, from rain or snow melt, to the front of the engine, where it can drip down near the timing belt cover.
I made it out of a piece of aluminium diamond plate. (12" x 24" properly trimmed & bent) It can easily be removed (4 sheet metal screws) for running around in the heat of the Utah desert...

Let me know if you want pics...& SPEAKING of pics, please post multiple images VERTICALLY, not horizontally. (look in the options menu of the top bar)
The first time I looked at this thread, I didn't even see the pics that were off screen to the right...
Thats a good idea...I never thought of directing the runoff. I will do that and would appreciate a few pics. Why didn't I think of that? Would be even better to do it like the hood insert runoff and run a hose off of it to outside the hood? I would have to think of that one a bit though.
As far as alignment, I didn't know there was a difference, they show fine on my screen? I will check that out though.