Skidplates by Rowhard

[Ldub]

only thing to look out for is that the hitch ldub has includes a "notch" cut out of it to fit the hitch pin.. otherwise the pin hole is half covered by the plate i thing.. i think that someone said they drilled another hole in their hitch to accommodate the hitch pin w/ rear skid plate

Not exactly, but close...

I fabricated the hitch myself, so it's not to be mistaken for Tone's re: fitment etc., though it should be close in configuration.

Due to the longer length of my locking pin, I had to relocate the hole, lower & farther back, or it would make cantact with the decorative "blisters" on the skid plate...

A "normal" pin, with a bent end would "probably" (no guarantees) clear without any modification.

Eventually, I plan on a "do-over" making it even beefier than it is now.
As it is now, it has ridiculos amounts of 1/4" triangular gusseting incorporated into the plate that's bolted to the frame...

If ya gonna build somethin', you might as well OVER build it...

My apologies for the blatant T-J Rowhard...

[etlsport]

hah dub i didnt know your hitch was custom.. or that it was you who moved the pin lol...

i meant to say the plate dub has.. not the hitch..
here is the notch i am talking about.. from ron's gallery



from posts i read he had 2 different rear plates.. 1 that was solid for vxs without a hitch there.. and 1 for vxs with a hitch that included the notch shown in the photo.. they were the same size and all, just one had a recess in the mold too allow for a pin

of course thats not to say it wouldnt work w/o it, i dont know for sure, never actually seen one of the rear plates in person, just wanted to give the heads up

[rowhard]

hah dub i didnt know your hitch was custom.. or that it was you who moved the pin lol...

here is the notch i am talking about.. from ron's gallery



from posts i read he had 2 different rear plates.. 1 that was solid for vxs without a hitch there.. and 1 for vxs with a hitch that included the notch shown in the photo

WOW, you just don't know how much I appreciate this info and drawing. I was planning on working on this issue this week end since I have Tone's frame mount hitch on my VX.

[Ldub]

WOW, you just don't know how much I appreciate this info and drawing. I was planning on working on this issue this week end since I have Tone's frame mount hitch on my VX.

So we're forgiven for the Thread-Jack?...

[rowhard]

So we're forgiven for the Thread-Jack?...

I don't know, seems related to me

[Ldub]

hah dub i didnt know your hitch was custom.. or that it was you who moved the pin lol...

from posts i read he had 2 different rear plates.. 1 that was solid for vxs without a hitch there.. and 1 for vxs with a hitch that included the notch shown in the photo

OK, now I see what you meant by "notch".
I got mine from Beej, no notch, no cutout for the hitch, & massaged it a bit...
Row, blatant T-J apologies are STILL in effect...

[don moore]

Im still waiting on the rejects..I wanted to paint them with rough paint for the rugged look..........hint hint

[rowhard]

hah dub i didnt know your hitch was custom.. or that it was you who moved the pin lol...

i meant to say the plate dub has.. not the hitch..
here is the notch i am talking about.. from ron's gallery



from posts i read he had 2 different rear plates.. 1 that was solid for vxs without a hitch there.. and 1 for vxs with a hitch that included the notch shown in the photo.. they were the same size and all, just one had a recess in the mold too allow for a pin

of course thats not to say it wouldnt work w/o it, i dont know for sure, never actually seen one of the rear plates in person, just wanted to give the heads up

Okay, so am ready to tackle this problem. Having never seen a rear plate, with or without the notch, am thinking maybe a 1 inch dowel, cut in half, glued to a plate then making a mold from that. Is that the right size? I can WAG the length, just not sure of the diameter.

[Ldub]

Okay, so am ready to tackle this problem. Having never seen a rear plate, with or without the notch, am thinking maybe a 1 inch dowel, cut in half, glued to a plate then making a mold from that. Is that the right size? I can WAG the length, just not sure of the diameter.

That sounds about right (1" dia), but you would want to glue it to the mold, not the plate, to make the indent...

Or am I looking at this wrong? (it wouldn't be the first time...)

[rowhard]

That sounds about right (1" dia), but you would want to glue it to the mold, not the plate, to make the indent...

Or am I looking at this wrong? (it wouldn't be the first time...)

ah,..... good question. Think I wrote that when I was well into a bottle of Kentucky's finest. Think I need to do what you said, then make a plate to make another mold. This is getting to confusing.

[Ldub]

Think I wrote that when I was well into a bottle of Kentucky's finest. Think I need to do what you said, then make a plate to make another mold. This is getting to confusing.

I believe what you're describing is called "corn-fusion" when Mr. Jack is involved...

That reminds me...

What is it called when hillbillies get re-incanated?...

re-in TAR nation...

[TheGanzman]

I believe what you're describing is called "corn-fusion" when Mr. Jack is involved...

That reminds me...

What is it called when hillbillies get re-incanated?...

re-in TAR nation...

Hush your MOUTH, boy! Jack is made in Tennessee!!

[circmand]

What is it called when hillbillies get re-incanated?...

re-in TAR nation...

Should be what is it called when hillbillies get re-incarnated?

re-tardation