sounds like motor, I did the same for a while and did the resistor and still had problem after a while, then replaced motor and put in old resistor and no problem since, do have an extra resistor incase that happens now though.
sounds like motor, I did the same for a while and did the resistor and still had problem after a while, then replaced motor and put in old resistor and no problem since, do have an extra resistor incase that happens now though.
LB, could it just be that something in the fan is stuck and when you hit the glove box it releases the fan so it can start spinning? I know I've heard some ticking once or twice out of my fan so something is in there hitting the fan blades.
"The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong, it usually turns out to be impossible to get at or repair."
-Douglas Adams, Mostly Harmless
You know I thought the same thing. I guess I will take it apart and check it out tonight while I have the entire inside removed (long story). But I just thought if something was stuck in there I could hear it, but I found a blower motor on Amazon for $40 so I think I will try that after check for something stuck in there. Thanks everybody :-)