Ok, same issue resurfaced again. "Brake" clunk when releasing brakes after a stop. I went under today and pushed on the exhaust near the hangers. I noticed that when I pushed hard/agressively enough, the exhaust on the TOD side hit the cross member. So, I took a heavy-duty hose clamp and clamped the rubber mount for the exhaust at both mount sites. Wah LAH! No more banging.. again. (The original remedy (2 posts up) did fix it... it's just that the rubber stretched a bit over 6 months. The clamp just rejuvinated the fix )
I also lubed the rear propeller-shaft zyrks.
Again.. a happy VX.
I'll have to keep an eye on this every few months...
Next, to replace all fluids.