Results 1 to 15 of 19

Thread: Checkers Anyone? Alpine PDX-5 Amplifier Install

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    May 2007
    Location
    2001 Ebony #1177
    Posts
    65
    Thanked: 0
    Nice setup, A good sub will take any audio system to the next level (properly integrated, of course). Sound deadening in the doors will make the biggest diffrence in the VX acoustically.. I used two Cascade door kits and a speaker kit per door and then sprayed the interior door plastic panel with a can of quiet kote per door. Closing the door now sounds like a bank vault closing and you really have to watch how hard you close the door. Then if you want to go nuts, you can do the whole rear of the truck (most importantly the rear wheel wells). I really like the vinyl based stuff (cascade) better than asphalt (dynamat), it weighs less and doesn't stink.
    Last edited by Phantom : 02/03/2009 at 07:33 PM
    [SIGPIC][/SIGPIC]

  2. #2
    Member Since
    Jan 2008
    Location
    1999 Astral Silver 0481
    Posts
    2,672
    Thanked: 0
    I placed two 4 channels amps behind the subs box right behind the rear seats.
    Dakar was just the begining.

  3. #3
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    Quote Originally Posted by Gussie2000 View Post
    I placed two 4 channels amps behind the subs box right behind the rear seats.
    2@4channels??? are you running them at 2ch per amp?? if designed like that, you could have gotten more power for less cost out of 2@2ch i believe...

    interesting though....

    unless your running 6 speakers...
    "Do Not Seek Praise. Seek Criticism."

    "If You Can't Solve A Problem, It's Because You're Playing By The Rules."

    "The Perosn Who Doesn't Make Mistakes Is Unlikely To Make Anything."

    -Paul Arden

  4. #4
    Member Since
    Jan 2008
    Location
    1999 Astral Silver 0481
    Posts
    2,672
    Thanked: 0
    Quote Originally Posted by pbkid View Post
    2@4channels??? are you running them at 2ch per amp?? if designed like that, you could have gotten more power for less cost out of 2@2ch i believe...

    interesting though....

    unless your running 6 speakers...
    I've running the four speakers (3 ways) on one amp @ 125 watts each channel),the two subs ( 135 watts each ) on the other amp & got two channels free right now.
    I bought the amps used in excelent conds,they are sony Xplode 550 watts each;didn't use the factory wiring,i runned the long way by adding new wiring all around the VX for all components,at 60% of power the VX shakes like a gel you can clearly hear the music from out side.

    Even though i love music pumping down the street i fall into the moderate group category.

  5. #5
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    Quote Originally Posted by Gussie2000 View Post
    I've running the four speakers (3 ways) on one amp @ 125 watts each channel),the two subs ( 135 watts each ) on the other amp & got two channels free right now.
    I bought the amps used in excelent conds,they are sony Xplode 550 watts each;didn't use the factory wiring,i runned the long way by adding new wiring all around the VX for all components,at 60% of power the VX shakes like a gel you can clearly hear the music from out side.

    Even though i love music pumping down the street i fall into the moderate group category.
    nice, good set up...
    i was gonna say that your math doesnt really add up enless your pumping a ton of power into something...it makes sense now though...

  6. #6
    Member Since
    Jan 2008
    Location
    1999 Astral Silver 0481
    Posts
    2,672
    Thanked: 0
    Quote Originally Posted by pbkid View Post
    nice, good set up...
    i was gonna say that your math doesnt really add up enless your pumping a ton of power into something...it makes sense now though...
    Yes thanks !

    If wasn't because of the bunch of jerks always lurking to find a good deal breaking into cars i were put a nice NAV system at the upper DIN,but had to keep the set underlow by adding a cassette deck there,the digital EQ is located at the lower DIN & the 6-CD changer disguiss very well behind the center console thanks to its black color. All kenwood brand

  7. #7
    Member Since
    Jul 2005
    Location
    Former 00' Kaiser #0804, 98 White 4Runner SR5
    Posts
    3,761
    Thanked: 0
    see i went really crazy....i put a new panel up top where the stock radio goes to put switches in...for winches and lights....

    then i moved the radio down to the place where the 6-cd changer goes along with modifying where the ash-tray and the cigarette lighter goes (see my gallery)...

    it looks great..and it also keeps the theives from seeing the radio because it moves it down low...

Similar Threads

  1. Alpine S/C install PDF
    By Ldub in forum VX Modifications...
    Replies: 2
    Last Post: 04/06/2010, 01:12 AM
  2. question to those with Alpine SC
    By ScottinMA in forum VX Troubleshooting...
    Replies: 85
    Last Post: 01/06/2010, 04:24 PM
  3. Alpine S/C users read this!!!!
    By bigpoppax2 in forum VX Modifications...
    Replies: 19
    Last Post: 07/15/2008, 11:16 AM
  4. Amplifier Ground Question...
    By biju in forum VX Talk...
    Replies: 10
    Last Post: 05/08/2006, 08:55 AM
  5. 411 on Tone & Alpine
    By xdfarrx in forum VX Talk...
    Replies: 1
    Last Post: 03/06/2005, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails