Results 1 to 15 of 64

Thread: Was the abs module ever corrected

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member Since
    Feb 2011
    Location
    xxxx xxx xxxx
    Posts
    83
    Thanked: 0
    Quote Originally Posted by Maddawg View Post
    No one in here mentions connectors. I had problems with the TOD light coming on. Driving symptom was felt when cranking wheels almost to stop while moving, as though driving over speed bump or wheels out of round. Dealer diagnosed it as the TOD wiring harness. $1400 for the harness plus labor. I read online that it may be the connector and to clean them. That's what I did and it cured the problem. So now my ABS light comes on solid while driving. Stop, turn off ignition, restart, no light. So going to clean connectors. I'll let you know if that works for the ABS.
    Great idea...I'll do this before anything else.

  2. #2
    Member Since
    Feb 2011
    Location
    2001, Kaiser Silver, VX, 0871
    Posts
    117
    Thanked: 1

    Bookmarked ABS Module

    This part also malfunctioned on my VX last year and needed to be replaced. I went online and found a Newer Replacement than my 2001 at a Salvage Yard on Long Island. I discovered that the Isuzu OEM part is Exactly the SAME for I think the Trooper or Rodeo maybe Both! Merlin could explain. Took a Few Minutes to Install by my Mechanic and it works like a Charm ever since !

  3. #3
    Member Since
    Feb 2011
    Location
    xxxx xxx xxxx
    Posts
    83
    Thanked: 0
    Quote Originally Posted by ALC1717 View Post
    This part also malfunctioned on my VX last year and needed to be replaced. I went online and found a Newer Replacement than my 2001 at a Salvage Yard on Long Island. I discovered that the Isuzu OEM part is Exactly the SAME for I think the Trooper or Rodeo maybe Both! Merlin could explain. Took a Few Minutes to Install by my Mechanic and it works like a Charm ever since !
    good call. BTW: The cleaning of terminals did NOT work for me, though oddly, after cleaning the light did not come on for like 20 miles.

    Saturday I investigate soldering.

  4. #4
    Member Since
    May 2012
    Location
    2001 Iron Man,Vehicross,0814
    Posts
    490
    Thanked: 0
    Quote Originally Posted by xcelr8 View Post
    good call. BTW: The cleaning of terminals did NOT work for me, though oddly, after cleaning the light did not come on for like 20 miles.

    Saturday I investigate soldering.
    Before soldering, try a conductive grease on the terminals.
    3" suspension lift, shocks: Rancho 9000, tires 33"x11.5", wheels 16"x8", offset= 0, no front sway bar

Similar Threads

  1. ABS Module
    By haggisgood in forum VX Troubleshooting...
    Replies: 10
    Last Post: 02/19/2009, 01:25 PM
  2. replacing the ABS module
    By etlsport in forum VX Troubleshooting...
    Replies: 25
    Last Post: 12/02/2008, 12:09 PM
  3. ABS module, how much??!
    By Joe Isuzu in forum VX Talk...
    Replies: 8
    Last Post: 10/02/2008, 07:42 AM
  4. ABS module
    By WiSDoM in forum VX Troubleshooting...
    Replies: 6
    Last Post: 09/01/2007, 02:26 PM
  5. TOD Module
    By WiSDoM in forum VX Talk...
    Replies: 8
    Last Post: 06/30/2006, 09:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
$lv_vb_eventforums_eventdetails