Quote Originally Posted by Tone View Post
If the ABS light is NOT flashing, it is typically only a sensor or wiring to sensor issue and ABS WILL continue to operate correctly. IF the ABS light is flashing, it is the control module and ABS will NOT be working correctly. In TX, you can pass a safety inspection with the light lit as long as it is not flashing and/or the brake warning light on the dash is not on.

Also, if you have NOT been flushing your brake fluid regularly (at least every two years) it is probably dark or black and will over time destroy the module under the hood.
Dear Tone and Members:

My ABS turned on for the first time, and intermittently turns off, but then returns. However it is not flashing just solid on or off. The brake warning light on the dash is never on. So I hope the ABS will continue to operate and if need be, pass CA inspection.

However, I did notice that upon starting my VX, I stopped hearing and feeling the clicking/pulsing in the brake pedal which is supposed to indicate that the ABS is checking itself?

Could this indicate that the problem is beyond a sensor or wiring to sensor issue?

Thanks so much!