Post of all Rims and Tires out there!

[logman]

I noticed my truck is half way up the page here. My wheels are American Racing Atx Mojave Coated w/ Teflon, 16x8. Purchased from Tire Rack.

I had to use the lugs to center them on the hub because the center caps are larger than the stock rims. I went with them because they reminded me of the 1980's trooper rims. They rock!

[taylorRichie]

I forgot how much I love this thread... Keep up the good work!

[Mile High VX]

Wheels are American Racing Tactic in Matte Black
Tires are Toyo A/T Open Country

Looks good John!

[etlsport]

Wheels - 18x8.5 Granite Alloy GA5 0 Offset
Tires - 285 / 60 / 18 Falken ST Z04
No Lift, Significant Cladding Triming

[navistar]

16x8 silver Borbets
Falken Ziex S/TZ P275/70R16
I had 8 of these wheels imported from Ireland for my VXs
Customized center hub emblems with VX graphic
Lifted 2.5'' Independent4X

[wintermute]

Wheel: V-Rock VR3 Recon 18x9, +18mm Offset
Tire: Nitto Terra Grappler 255/60/18
Stock height

[pbkid]

i really like those tires wintermute... nice look.
i would personally get rid of the centercap.. i just think it would keep that nice shape that the rest of the wheels have.

[Ldub]

Wheel: V-Rock VR3 Recon 18x9, +18mm Offset
Tire: Nitto Terra Grappler 255/60/18
Stock height

Dude...

[patrick cooper]

patrick cooper the black one has 16x8 rims dont know the make
the tyres are simex jungle trekers 285/85/16 or old size 34/10.5/16

[So-CalVX]

16x8 rock crawler series 98 flat black rims with 33x10.50 BFG KO tires
919 springs and t-bar cranks with cladding/metal trimming


and a beautifully weird comparrisson shot

[Ldub]

Here's the latetest incarnation...






Round Aluminium Things: 20" x 8" Centerline Tomahawk Rapid - 5" backspacing, large centerbore (polished, not chrome)
Big Rubber Things: 35" x 12.50" x 20" Nitto Mud Grapplers

Another inch of lift came courtesy of some 2" coil spacers in the rear, (Thanks Boss) and another 3 1/2 turns on the T-bars in front.
A LOT of fender liner/fender flare surgery, + lots of were required to enable full lock turns under suspension compression, so if you're squeamish about cutting up your VX, stay with the smaller rubber...

I also had to shorten up my rock sliders by a couple of inches.

I have another sumpin'-sumpin' up my sleeve, that'll be seen soon...

I'll post more pics in the next day or two or three after I get her all scrubbed up & waxed....

[djvx]

Here's the latetest incarnation...






Round Aluminium Things: 20" x 8" Centerline Tomahawk Rapid - 5" backspacing, large centerbore (polished, not chrome)
Big Rubber Things: 35" x 12.50" x 20" Nitto Mud Grapplers

Another inch of lift came courtesy of some 2" coil spacers in the rear, (Thanks Boss) and another 3 1/2 turns on the T-bars in front.
A LOT of fender liner/fender flare surgery, + lots of were required to enable full lock turns under suspension compression, so if you're squeamish about cutting up your VX, stay with the smaller rubber...

I also had to shorten up my rock sliders by a couple of inches.

I have another sumpin'-sumpin' up my sleeve, that'll be seen soon...

I'll post more pics in the next day or two or three after I get her all scrubbed up & waxed....

1 bad VX Ldub, better than porn

[Ldub]

1 bad VX Ldub, better than porn

but...

Wait'll ya see what's in the works...

[Mysteria Black]

patrick cooper the black one has 16x8 rims dont know the make
the tyres are simex jungle trekers 285/85/16 or old size 34/10.5/16

I *love* that combo and SO hoped to find out what they were...

[roguebrun]

285/75/16 BFG mud terraine

2 inch torsion lift clad trimming and BFH mod